Abrasive belts for industry use

Product information

  • Various dimensions: from file belts to wide belts, and from sleeves to long belts
  • Available with the full range of VSM grain technologies: from VSM ACTIROX and VSM CERAMICS Plus to VSM NON-WOVEN
  • Available in grit sizes from 20 to 1200

Backings

  • Backings made of paper or cloth materials
  • Various cloth backings available – from extremely flexible to extremely sturdy
  • Paper backings from 70 g/m2 – 300 g/m2 for dry grinding applications

Belt joints

  • Various belt joint types – perfectly matched to the respective application
  • Belt joints with very high tear strength
Abrasive belts with tear-resistant belt joints

Additional grinding-active layers

Improves cutting performance while reducing temperatures in the contact zone.

Prevents chip adhesion to avoid clogging up the abrasive. Also results in longer service life.

By avoiding electrostatic build-up, the dust created by grinding does not adhere to the machine or workpiece.

Backstand

Series
Grain technology
Unalloyed Steel
Stainless steel
Non-ferrous metals
Pressure
Removal rate
Surface fineness
Grit range
Features
VSM ACTIROX
36+, 60+
VSM TOP SIZE Also suitable for wet grinding
VSM CERAMICS
24 - 120
VSM TOP SIZE Also suitable for wet grinding
VSM CERAMICS
24 - 120
Also suitable for wet grinding
VSM CERAMICS
24 - 120
VSM ALU-X
VSM CERAMICS Plus
20 - 120
VSM TOP SIZE Also suitable for wet grinding
VSM XELERION
P240 - P2500
VSM COMPACTGRAIN
P80 - P1200
Also suitable for wet grinding
VSM COMPACTGRAIN
P80 - P240, P320, P400, P600
Also suitable for wet grinding
VSM NON-WOVEN
100 - 400
Also suitable for wet grinding

Flat Polishing

Series
Grain technology
Unalloyed Steel
Stainless steel
Non-ferrous metals
Pressure
Removal rate
Surface fineness
Grit range
Features
VSM ACTIROX
36+, 60+
VSM TOP SIZE Also suitable for wet grinding
VSM CERAMICS Plus
20 - 120
VSM TOP SIZE Also suitable for wet grinding
VSM CERAMICS
36 - 120
VSM TOP SIZE Also suitable for wet grinding
VSM CERAMICS
24 - 120
VSM ALU-X
VSM COMPACTGRAIN Plus
P80 - P800
Also suitable for wet grinding
VSM COMPACTGRAIN
P80 - P600
Also suitable for wet grinding
VSM NON-WOVEN
100 - 400
Also suitable for wet grinding

Centerless Polishing

Series
Grain technology
Unalloyed Steel
Stainless steel
Non-ferrous metals
Pressure
Removal rate
Surface fineness
Grit range
Features
VSM CERAMICS
36 - 120
VSM TOP SIZE Also suitable for wet grinding
VSM CERAMICS Plus
20 - 120
VSM TOP SIZE Also suitable for wet grinding
VSM CERAMICS
24 - 120
VSM ALU-X
VSM CERAMICS
24 - 120
Also suitable for wet grinding
VSM ILUMERON
P120 - P1200
Also suitable for wet grinding
VSM COMPACTGRAIN Plus
P60 - P600
Also suitable for wet grinding
VSM COMPACTGRAIN
P60 - P600
Also suitable for wet grinding
VSM NON-WOVEN
100 - 400
Also suitable for wet grinding

Technical information

Backings

Cloth backings

  • Available in aramid, cotton, polyester or polycotton
  • The cloth is utilized as a backing for abrasives after in-house finishing has been completed, to adjust elongation and flexibility.
  • High tear strength
  • Depending on the application, cloth backings are available from extremely flexible (E-cloth) to extremely sturdy (Z-cloth)

Paper backings

  • Stretch-resistant
  • Lower weight compared to cloth
  • The lighter the paper, the more flexible the backing becomes

Belt joints

E07 – VSM STANDARD BELT JOINT

Straight cut, glued underneath with film from backing side

Stable and sturdy standard belt joint for all geometries. E07 is mostly used for cloth-backed belts and is suitable for use in any application.

Stable and sturdy standard joint

E04 – VSM BELT JOINT

Wave cut, glued underneath with film from backing side

Belt joint for ‘gentle’ engagement with the contact zone, offers smoother belt running. Suitable for wide and narrow belts with cloth backing.

Belt joint with corrugated cut

E13 – VSM BELT JOINT

Straight cut, both ends overlapping

This belt joint is mainly used for wide and long belts with paper backings for flat surface grinding

Belt joint with straight cut, overlapped on both ends

E14 – VSM BELT JOINT

Straight cut, both ends overlapping, no grain on upper flap

Suitable for flat surface grinding applications with platen. E14 is mainly used for woodworking applications.

Belt joint for woodworking

Language selection

Please select your preferred language

VSM USA

VSM Abrasives Corp.
1012 East Wabash St.
O’Fallon, MO 63366
P +1 636 272 7432
F +1 636 272 6394
us.info@vsmabrasives.com
us.vsmabrasives.com

Contact

Find your local contact